TPU tooth socket introduction:
The invisible appliance made of safe and transparent elastic polymer material is used for treatment. Compared with the traditional fixed appliance, it does not need bracket and steel wire, the clinical operation is greatly simplified, the correction
process is time-saving and labor-saving, and the whole treatment process can be completed without others' awareness, without affecting daily life and social interaction. Invisible orthodontics is a high and new science and technology in the field of Orthodontics, which breaks the limitations of traditional orthodontics. JWELL supplies whole line for TPU tooth socket sheet extrusion line
Model | Products width(mm) | Products thickness(mm) | Capacity(kg/h) | ||
---|---|---|---|---|---|
JWS75/JWS120 | 1000-3000 | 0.02-2.0 | 300-350 | ||
JWS90/JWS90/JWS90 | 1000-3000 | 0.02-2.0 | 200-300 | ||
JWS65/JWS120/JWS65 | 1000-3000 | 0.02-2.0 | 300-400 | ||
Note:The specifications are subject to change without prior notice. |
Application for TPU film in medical:
TPU material features excellent kink resistance, elasticity and flexibility. The internal pressure resistance is much higher than that of PVC, the transparency is better than that of PVC / EVA and TPO, high chemical resistance. Gamma ray and ETO can be used for sterilization, the drug adsorption is low and easy to bond. It is an ideal material for manufacturing a variety of medical equipment, including various infusion tubes, infusion tube drip, implants and other short-term applications.
● The production line adopts Siemens man-machine interface and Siemens computer control operating system, which can realize accurate control and humanized operation of the equipment.
● The calendering machine adopts super-mirror chrome-plating roller and is equipped with servo motor drive to effectively ensure the accuracy of products.
● Special winding machine for soft film can not only ensure the evenness of the edge of the finished coil, but also prevent wrinkling, bulging and stretching of the finished product.
PVC soft bag is developed overcoming the shortcomings of glass bottles, with good chemical resistance, good temperature resistance performance. Main application: blood bag, urine bag, drainage bag and other fields.
Non-PVC soft infusion bag packaging is developed after glass bottle, plastic bottle and PVC soft bag. It is modified on the basis of PVC. It has the advantages of PVC soft bag and overcomes the disadvantages of PVC soft bag. Non-PVC infusion bag adopts closed
infusion, with balanced pressure, and can maintain human body without introducing external air.The circulation of the closed system, to avoid the risk of air pollution, is gradually becoming a infusion packaging trend.Non-PVC soft infusion bag has good temperature resistance, not any seasonal restrictions for transport and also no worry about severe shock to the product during transportation. Since the product has anti-drop characteristics, can be dropped from a certain height, suitable for disaster relief and first aid.
Model | JWS45/28-1500 | JWS90/28、JWS120/28-1500 |
---|---|---|
Material | PVC、EVA | PVC、EVA |
Products width | 400mm | 900mm |
Products thickness | 0.12-0.35mm | 0.12-0.35mm |
Extruder specification | JWS45/28 | JWS90/28 |
Designed extrusion output | 20kg | 100kg-250kg |
The production line use PE air-permeable plastic granule as raw material, and uses extrusion casting method to melt-extrude the PE-modified air-permeable plastic granule containing inorganic filler through a flat die and the roller is stretched at a high rate to produce a sub-nanometer micro Porous membrane.
Model | Screw Diameter | Material | Products width | Capacity (Max.) | Main motor power |
---|---|---|---|---|---|
JWS130 | 130mm | PE | 1600mm | 450-600kg/h | 160KW |
JWS160 | 130mm | PE | 2200mm | 450-600kg/h | 200KW |
Note:The specifications are subject to change without prior notice. |
Meltblown Non-woven Fabric is mainly made of polypropylene, and the fiber diameter can reach 1 ~ 5 microns. There are many voids, fluffy structure, and good anti-wrinkle ability. These ultrafine fibers with unique capillary structure increase the number and surface area of fibers per unit area, so that the meltblown cloth has good filterability, shielding, heat insulation and oil absorption . Can be used in the fields of air, liquid filter materials, insulation materials, absorbent materials, mask materials, thermal insulation materials, oil-absorbing materials, and wiping cloths.
Model | Screw Diameter | Material | Products width | Capacity (Max.) | Main motor power |
---|---|---|---|---|---|
JW65 | 65 | PP | 800mm | 500-600kg/d | 22KW |
JW90 | 90 | PP | 1600mm | 1200-1500kg/d | 45KW |
JW105 | 105 | PP | 2400mm | 2000-2500kg/d | 55KW |
JW135 | 135 | PP | 3200mm | 3000-3500kg/d | 75KW |
Note:The specifications are subject to change without prior notice. |
The production line is mainly for PVC, PP, PE etc. Plastic tube to medical products, chemical and drink fields. It has the following features:
●Advanced design technology, inverter control for main machine and markline machine, stable extrusion speed.
●Automatic control the water level and temperature in cooling trough.
●Belt and press roll for haul off machine, inverter control and stable haul-off speed.
Type | Screw Diameter | Screw L/D | Main Power | Capacity | |
---|---|---|---|---|---|
JWS-45 | 45mm | 28:1 | 7.5kw | 15-18kg/h | |
JWS-50 | 50mm | 28:1 | 11kw | 20-25kg/h | |
JWS-65 | 65mm | 28:1 | 18.5kw | 30-40kg/h | |
Note:The specifications are subject to change without prior notice. |
Drive system is special for high torque unit. Gear and shaft are made of high strength alloy steel, nitriding and polishing.
Temperature adjusting system and good cooling of barrel ensure an accurate temperature.
Type | Screw Diameter | Screw L/D | Main Power | Capacity | |
---|---|---|---|---|---|
JWS-45 | 45mm | 28:1 | 7.5kw | 15-18kg/h | |
JWS-50 | 50mm | 28:1 | 11kw | 20-25kg/h | |
JWS-65 | 65mm | 28:1 | 18.5kw | 30-40kg/h | |
Note:The specifications are subject to change without prior notice. |
The machine is used to produce nonwoven fabrics for clothing, medical and sanitary materials, construction, industry, agriculture, disposable products for hotels and other nonwoven and industrial fabrics, etc.
Model | Width | Speed | Gram range | Output | Installed capacity | Dimension(approx) |
---|---|---|---|---|---|---|
JW-1600-S | 1600mm | ≤150m/min | 9-250g/m2 | 3-6T/d | ≈200KVA | 20m*10m*12m |
JW-2400-S | 2400mm | ≤150m/min | 9-250g/m2 | 5-7T/d | ≈250KVA | 20m*11m*12m |
JW-3200-S | 3200mm | ≤150m/min | 9-250g/m2 | 8-10T/d | ≈315KVA | 20m*13m*12m |
JW-1600-SS | 1600mm | ≤300m/min | 10-120g/m2 | 5-10T/d | ≈400KVA | 35m*12m*12m |
JW-2400-SS | 2400mm | ≤300m/min | 10-120g/m2 | 10-12T/d | ≈500KVA | 35m*15m*12m |
JW-3200-SS | 3200mm | ≤300m/min | 10-120g/m2 | 12-20T/d | ≈800KVA | 35m*17m*12m |
The above data is for reference only, and the specific content is subject to the purchase contract. |
The machine is used to produce nonwoven fabrics for medical isolation clothing, surgical clothing, sheets curtain, sanitary napkins, baby diapers, adult incontinence pad (pants) and other disposable medical protection and personal health care industry, etc.
Model | Width | Gram range | Output | Texture | |
---|---|---|---|---|---|
JW-1600-SMS | 1600mm | 9-80g/m2 | <300m/min | 菱形 方点 芝麻点 梅花点 椭圆点 一字纹 | |
JW-2400-SMS | 2400mm | 9-80g/m2 | <300m/min | ||
JW-3200-SMS | 3200mm | 9-80g/m2 | <300m/min | ||
The above data is for reference only, and the specific content is subject to the purchase contract. |
Performance and advantages
·Suitable for producing different kinds of plastic medical bed head boards、foot boards and guardrails
·Adopt high output extrusion system,accumulating die head.
·According to the different material, optional JW-DB single station hydraulic screen-exchanger system.
·According to the different product size, customized the platen type and size.
Model | Unit | BM100 | BM160 |
Max product volume | L | 100 | 160 |
Dry cycle | Pc/h | 360 | 300 |
Die head structure | Accumulating type | ||
Main screw diameter | mm | 100 | 100 |
Max plasticizing capacity (PE) | Kg/h | 240 | 240 |
Driving motor | Kw | 90 | 90 |
Accumulating volume | L | 12.8 | 18 |
Oil pump motor power(Servo) | KW | 22 | 22 |
Clamping force | KN | 600 | 800 |
Space between platen | mm | 500-1300 | 500-1400 |
Platen size W*H | mm | 500-1300 | 1120*1200 |
Max.mould size | mm | 800*1200 | 900*1450 |
Heating power of die head | KW | 30 | 30 |
Machine dimension L*W*H | m | 5.5*2.5*4.0 | 7*3.5*4 |
Machine weight | T | 16 | 20 |
Total power | KW | 135 | 172 |
Disposable plastic straw pipe/dropper is widely used in laboratory, food research, medical industrial etc. Specifications are 0.2ml、0.5ml、1ml、2ml、3ml、5ml、10ml Etc.
Model | Unit | BM02D |
Max product volume | L | 2 |
Dry cycle | Pc/h | 900*2 |
Die head structure | Continuous type | |
Main screw diameter | mm | 65 |
Max plasticizing capacity (PE) | Kg/h | 70 |
Driving motor | Kw | 22 |
Oil pump motor power(Servo) | KW | 11 |
Clamping force | KN | 40 |
Space between platen | mm | 138-368 |
Platen size W*H | mm | 286*330 |
Max.mould size | mm | 300*350 |
Platen moving stroke | mm | 420 |
Heating power of die head | KW | 6 |
Machine dimension L*W*H | m | 3.0*1.9*2.4 |
Machine weight | T | 5 |
Total power | KW | 45 |